Brand Name : Focus Infra or OEM
Model Number : 1.0*40MM
Place of Origin : China
MOQ : 10000pcs
Price : Negotiable
Payment Terms : T/T
Supply Ability : 3000000pcs per month
Delivery Time : 15 days
Packaging Details : 50pcs/bag
Product name : 40mm Fiber Cable Splice Double Steel Rod FTTH Fiber Heat Shrink Sleeves
Use : FTTH Drop Cable Connection Protective
Brand : Focus Infra or OEM
Material : Heat Shrink Tube, Stainless Steel Rod, Fusion Tube
Application : FTTH/FTTX/FTTB Network
Fit for : Round Drop Cable, Flat Drop Cable
Length : 40mm
Diamter Of Steel Rod : 1.0mm
Inner Diameter : 3.8mm
Steel Rod Pin : 2
Color : Clear
Operating Temperation : -45°C to +120°C
Pack : 50pcs/bag or Negotiable
40mm Fiber Cable Splice Double Steel Rod FTTH Fiber Heat Shrink Sleeves
Description:
Fiber Heat Shrink Sleeve We Also Called it as “FTTH Drop Splice Closure”, “FTTH Drop Repair Splice Closure ”, “ FTTH Drop Repair joint kits”. This Fiber Heat Shrink Sleeve is used in FTTH Drop Cable Connection. We use this Fiber Heat Shrink Sleeve to make heat Shrinkable Splice with 2pcs Drop Cable (Or Drop Cable SC Connector Terminated one side). Designed for either Flat Drop Cable or Round Drop Cable. this Fiber Heat Shrink Sleeve is installed indoor or Outdoor, provide good connection and protection in FTTH Constructions.
Consist of a rod of reinforcing the splice, hot fusion tubing and cross-linked polyolefin. To rebuild the coating of fiber to provide mechanical strength at the fusion joint area and keep optical transmission properties;
Moisture resistant for environmental protection Clear sleeve make it easy to detect splice before shrinkage Easily use and avoid any damages to the optical fiber during installation Color optical fiber splice protector is very convenience for installation.
The Fiber Heat Shrink Sleeve is widely used in FTTH Drop cable joint connection protective. With big Inner Diameter of inner tube, we can put drop cable easily.
Features:
High transparent fiber fusion splicing heat shrinkable tube
1.0mm thick high quality stainless steel
40mm non-stick inner wall, fast welding
No air bubbles, no fiber breakage
Quality assurance, both single and double needles
Technical Parameters:
Specification | Test method | Typical data |
Tensile strength(MPa) | ASTM D 2671 | 18 |
Elongation at Break (%) | ASTM D 2671 | 700 |
Density(g/cm2) | ISO R1183D | 0.94 |
Dielectric strength (KV/mm) | IEC 243 | 20 |
Permittivity | IEC 243 | 2.5 |
Length rate of change (%) | ASTM D 2671 | +5 |
40mm Ribbon Fiber Splice Sleeve For FTTH FTTX FTTB Network Images |